|
|
 |
|
Product Query |
|
|
|
|
|
|
XK-S,XK-CLS,XK-SP
|
XK-S carbon steel:foraluminiu panel,steel panel with hardness HRB≤80.
| | | SELF-CLINCHING NUTS
| Strong internal threads in sheets as thin as 0.03""/0.8mm,thread sizes #2 to 1/2"" and M2 to m10. | | | | 
XK-SL
|
XK-SL Carbon steel:for steel panel with hardness HRB≤80.
| | | SELF-CLINCHING LOCKNUTS
| These locknuts are designed with a unique and economical tri-dent locking feature which meets demanding locking performance requirements. | | | | 
XK-F
|
XK-F Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
XK-F4 Hardened stainless steel: for stainless steel panel with hardness HRB≤90 (No stock for this model, we produce up on order).
| | | SELF-CLINCHING FLUSH FASTENERS
| Fasteners remains flush with both sides in sheets as thin as 0.60""/1.5mm. Thread sizes #2 to 1/4"" and M2 to M6. | | | | 
XK-AS,XK-AC,XK-LAS,XK-LAC
|
All models are for aluminium panel ,steel panel with hardness HRB≤70.
| | | FLOATING FASTENERS
| Floating action compensates for mating hole misalignment, available with locking or non-locking threads.Thread sizes #4 to 1/4"" and M3 to M6. | | | | 
XK-U,XK-UL,XK-FE,FEX,XK-FEO,XK-FEOX
|
All models are for aluminium panel ,steel panel with hardness HRB≤70.
| | | MINIATURE FASTENERS
| Spec Search (XK-U Non-locking,XK-UL Self-locking,XK-FEOX Non-locking,XK-FEO Self-locking,XK-FEX Non-locking,XK-FE Self-locking) " | | | | 
XK-B,XK-BS
|
XK-B Carbon Steel: for steel panel with hardness HRB≤80.XK-BS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
| | | BLIND FASTENERS
| Used for application requring blind ends.Blind end limits screw penetration and excludes dirt. Thread sizes #4 to 1/4"" and M2 to M6. | | | | 
XK-BOB,XK-BOBS
|
XK-BOB Carbon Steel: for steel panel with hardness HRB≤80.
XK-BOBS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
| | | HEXGONAL SELF-CLINCHING NUTS
| Strong internal threads in sheets as thin as .03""/0.8mm. Thread sizes M3 to M6. | | | | 
XK-LK,XK-LKS
|
XK-LK Carbon Steel: for steel panel with hardness HRB≤80.XK-LKS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.XK-LKA Aluminium: for aluminium panel, with hardness HRB≤50.
| | | SELF-LOCKING FASTENERS
| Have locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5. | | | | 
XK-BN,XK-BNS
|
XK-BN Carbon Steel: for steel panel with hardness HRB≤80.
XK-BNS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
| | | HEXGONAL INSERT NUTS
| Hexgonal insert nuts strong internal threads, in sheets as thin as 1.0mm. Thread sizes M3 to M6. Broadly applied to autos for its high quality of thrust and torque resistance. " | | | | 
XK-SO,XK-SOS,XK-SOA,XK-SO4
|
XK-SO Carbon steel: for steel panel with hardness HRB≤80.
XK-SOS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
XK-SOA Aluminium steel: for aluminium panel, with hardness HRB≤50.
XK-SO4 Hardened Stainless steel: for stainless panel, steel panel with hardness HRB≤90.(No stock for this model, we produce up on order).
| | | THRU-HOLE, THREAD STANDOFFS
| These self-clinching standoffs have thru-hole threads. Thread sizes #4 to #10 and M3 to M5. | | | | 
XK-TSO,XK-TSOS,XK-TSOA
|
XK-TSO Carbon steel: for steel panel with hardness HRB≤80.
XK-TSOS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
XK-TSOA Aluminium: for aluminium panel, with hardness HRB≤50.
| | | THREADED STANDOFF FOR THIN SHEET
| These threaded standoffs provide permanent thread in sheets as thin as .25""/0.63mm. | | | | 
XK-BSO,XK-BSOS,XK-BSOA,XK-BSO4
|
XK-BSO Carbon steel: for steel panel with hardness HRB≤80.
XK-BSOS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
XK-BSOA Aluminium: for aluminium panel, with hardness HRB≤50.
XK-BSO4 Hardened stainless steel: for steel panel with hardness HRB≤90. ( No stock for this model, we produce up on order).
| | | BLIND THREADED STANDOFFS
| These threaded standoffs provide permanent thread in sheets as thin as .25""/0.63mm. | | | | 
XK-DSO,XK-DSOS
|
XK-DSO Carbon steel: for steel panel with hardness HRB≤80.
XK-DSOS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
| | | THREADED STANDOFFS FOR CLOSE TO EDGE APPLICATIONS
| Screwlock standoffs for mounting D-sub connectors to panel. Provide a cost-effective solution to your connect mounting requirements. Can replace as many as ten pieces of loose hardware per connector and can be installed quickly. | | | | 
XK-CSS,XK-CSOS
|
XK-CSS XK-CSOS Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
| | | CONCEALED-HEAD STANDOFFS
| Designed so that a PC board or other components can be quickly slipped into the place and then removed by sliding the board sideways and lifting it off. " | | | | 
XK-SSA,XK-SSC,XK-SSS
|
XK-SSS Carbon steel: for steel panel with hardness HRB≤60.
XK-SSC Stainless steel: for aluminium panel, steel panel with hardness HRB≤70.
XK-SSA Aluminium: for aluminium panel with hardness HRB≤50.
| | | SNAP-TOP STANDOFFS
| Accurateboard simply by snaply space a P.C. board from another board or metal ping board on standoff. | | | | 
XK-SKC
|
XK-SKC Stainless steel : for aluminium panel, steel panel with hardness HRB≤70.
| | | KEYHOLE STANDOFFS
| Designed so that a PC board or other components can be quickly slipped into the place and then removed by sliding the board sideways and lifting it off. " | | | | 
XK-SKF
|
XK-SKF Stainless steel : for aluminium panel, steel panel with hardness HRB≤70.
| | | KEYHOLE STANDOFFS
| Designed so that a PC board or other components can be quickly slipped into the place and then removed by sliding the board sideways and lifting it off. | | | | 
XK-FH,XK-FHS
|
XK-FH Carbon steel: for steel panel with hardness HRB≤80.
XK-FHS Stainless steel: for aluminium panel, steel panel and brass panel with hardness HRB≤70.
| | | SELF-CLINCHING STUDS
| Flush-head studs for sheet thickness of .04""/1 mm and larger. " | | | | 
XK-FH4
|
XK-FH4 Hardened stainless steel: for stainless steel panel with hardness HRB≤90.
| | | SELF-CLINCHING STUDS
| Flush-head studs for sheet thickness of .04""/1 mm and larger. " | | | | 
XK-NFH
|
XK-NFH Carbon steel: for steel panel with hardness HRB≤80.
XK-NFHS Stainless steel: for aluminium panel, steel panel and brass panel with hardness HRB≤70.
| | | SELF-CLINCHING STUDS
| Flush-head studs for sheet thickness of .04""/1 mm and larger. | | | | 
XK-TFH,XK-TFHS
|
XK-TFH Carbon steel: for steel panel with hardness HRB≤80.
XK-TFHS Stainless steel: for aluminium panel, steel panel and brass panel with hardness HRB≤70.
| | | SELF-CLINCHING NON-FLUSH STUDS
| Non-flush studs for sheets as thin as .02/0.51mm. Stud head will project above the sheet surface approximately .025""/0.64mm. " | | | |
1
- 21  |
|
|
|
|
|
|
|
| |
|